Electrolic Silicon

Location:Home > Products > Electrolic Silicon > Text
JLD-254D PTC structural film conduction agent TW,it is single conponent adhesive,and the operation is very simple and convenient.It’s thermal conductivity and temperature tolerance are better than similar imported products.
  1. Product Introduction
            JLD-254D(grey)PTC structural film conduction agent TW,it is single conponent adhesive,and the operation is very simple and convenient.It’s thermal conductivity and temperature tolerance are better than similar imported products.The power decay rate is 1.5% , the price stability and ther special structure of PTC film are the best at present in China.

Performance indicators: 


Basic Materials

Color

Viscosity

Table Dry Time(min)

Tensile Strength MPa

Tension%

Full Cure Time

Cure type

Teat Resistance(0C)

Hardness
(Shore D)

Dielectric Constant 1Mhz

Breakdown strength KV/mm  

Thermal Conductivity W/m.h

Level

Silicone/
Epoxy

Gray and not  flowing paste

60-450Pa.s

8

2.2

80

Heated to 120 degrees to achieve best results

1200C 
20-30minites

-60-350

40

3.2

10

1.2

 94-V0


  1. Typical use
    The products are mainly used in air-conditioning,warm air blower,bath heater,foot basin,lon clip and other PTC heater.
  2. (Single conponent)  1kg *6bottles/ltem   5kg*2/ltem   10kg/barrel
     Storage
    The storage condition is refregerator,below 50C,can not change the original packaging.To prevent contamination of remaning glue, do not place any used glue back into the original bottle.
  3.  Other considerations
  4. 1、Users who need special packaging specifications should dileberate to us.
  5. The company has the rights of retained the best process to change the scope of development of new products or product specifications .
  6. Due to the unpredictable factors during the actual , we recommend that you make sure the quantities before bulk orders.
Update Time:2014-03-31 15:48:08Hit:5004Size:T|T
点击这里给我发消息点击这里给我发消息点击这里给我发消息点击这里给我发消息点击这里给我发消息