Electrolic Silicon

Location:Home > Products > Electrolic Silicon > Text
Electronic thermal grease has good thermal conductivity, it mainly used for the contact surface between the power amplifier tubes and fins.


Model

Appearance

Volume resistivity

Volatilize

Freeness

Electrical breakdown strength

Conductivity coefficient

Product density

JLD-5008

White

≥1.0×1015Ω·cm

≤1.8(180℃,24h)%

≤1.8 (180℃,24h)%

≥6.0 KV/mm

≥1.8w/m

2.1g/cm3

JLD-5009

White

≥1.0×1015Ω·cm

≤1.5(180℃,24h)%

≤1.5 (180℃,24h)%

≥6.0 KV/mm

≥0.8w/m

2.2g/cm3

JLD-5010

Gray

≥1.0×1015Ω·cm

≤1.6(180℃,24h)%

≤1.6 (180℃,24h)%

≥6.0 KV/mm

≥1.1w/m

2.2g/cm3

JLD-5011

Gray

≥1.0×1015Ω·cm

≤2.0(180℃,24h)%

≤2.0 (180℃,24h)%

≥6.0 KV/mm

≥3.3w/m

2.5g/cm3

Product Performance

 As the heat transfer medium ,this product is good electrical insulation and stability,low viscosity,high temperature resistance, long-term work in the temperature of -50℃~250℃ ,without Dried or melted. It is polysiloxane-based and high thermal conductivity fillers ,non-toxic tasteless non-corrosive, chemically stable physical properties,and high thermal conductivity.The ionization degree of thermal grease is 200℃.It is not cure in 200℃ ,not flowing.Fully meet the requirements of the EU ROHS directive.

Practical Process

Clean the surface of object waiting for coating, remove oil,squeeze the thermal crease and coat on the object directly.

Packing

750G/bottle ,24bottle/piece;1KG/bottle 12bottle/piece;15KG/barrel

Update Time:2014-03-31 15:45:14Hit:4890Size:T|T
点击这里给我发消息点击这里给我发消息点击这里给我发消息点击这里给我发消息点击这里给我发消息